transistor p series transistor with resistor for switching application silicon pnp epitaxial type description outline drawing unitmm rt1p140u rt1p140c RT1P140X is a one chip transistor with built-in bias resistor,npn type is rt1n140x. feature ?built-in bias resistor (r1=10k). application inverted circuit,switching c ircuit,interface circuit, driver circuit. equivalent circuit jeita jedec jeitasc-59 jedecsimilar to to-236 terminal connector ?base ?emitter ?collector terminal connector ?base ?emitter ?collector rt1p140m rt1p 140t jeitasc-70 jedec jeita-, jedec isahaya rt1p140s terminal connector ?base ?emitter ?collector terminal connector ?base ?emitter ?collector 0.15 0 0.1 0.55 0.7 0.3 0.4 0.8 0.4 1.6 0.5 0.5 1.0 1.6 0.16 0 0.1 0.8 1.1 0.4 0.5 1.5 0.5 2.5 0.95 0.95 1.90 2.9 0.15 0 0.1 0.7 0.9 0.3 1.25 0.425 2.1 0.65 0.65 1.3 2.0 0.425 4.0 1.0 1.0 14.0 3.0 1.27 1.27 0.45 0.1 2.5 0.4 c (out) e (gnd) b (in) r1 isahaya electronics corporation jeita jedec terminal connector ?emitter ?collector ?base 0.45 0.25 0.2 0.8 0.2 0.4 0.4 0.8 1.2
p series transistor with resistor for switching application silicon pnp epitaxial type maximum rating (ta=25) rating symbol parameter rt1p140t rt1p140u rt1p140m rt1p140c rt1p140s unit collector to base voltage -50 v emitter to base voltage -6 v collector to emitter voltage -50 v collector current -100 ma peak collector current -200 ma collector dissipation(ta=25) 125 ?@?@?@?@?@150?@?@?@?@?@?@?@?@?@?@?@?@200?@?@?@?@?@?@?@?@?@?@?@?@450 mw junction temperature +125 +150 storage temperature -55+125 -55+150 electrical characteristics (ta=25) package mounted on 9mm19mm1mm glass-epoxy substrate. limit symbol parameter test condition min typ max unit ?? c to e break down voltage i c =-100ar be = -50 v collector cut off current v cb =-50vi e =0 -0.1 a dc forward current gain v ce =-5vi c =-1ma 100 c to e saturation voltage i c =-10mai b =-0.5ma -0.3 v input resistance 7 10 13 k gain band width product v ce =-6vi e =10ma 150 mhz isahaya electronics corporation collector voltage - input off voltage -10 -100 -1000 -0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 input off voltagevi(off) (v) collector currentic (ua) v ce =-5v input on voltage - collectorcurrent -0.1 -1 -10 -0.1 -1 -10 -100 collector currentic (ma) input on voltagevi(on) (v) v ce =-0.2v dc forward current gain - collector current 10 100 1000 -0.1 -1 -10 -100 collector currentic(ma) dc forward current gainhfe v ce =-5v typical characteristics
marketing division, marketing planning departme nt 6 - 41 tsukuba, isahaya, nagasaki, 854 - 0065 japan keep safety first in your circuit designs! isahaya electronics corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility th at trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropri ate measures such as ( 1) placement of substitutive, auxiliary, ( 2) use of non - farmable material or ( 3) prevention against any malfunct ion or mishap. notes regarding these materials these materials are intended as a reference to our customers in the selection of the isah aya products best suited to the customer?s application; they don't convey any license under any intellectual prop erty rights, or any other rights, belonging isahaya or third party. isahaya electronics corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagram s, charts or circuit application examples contained in these materials . all information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, a nd are subject to change by isahaya electronics corporation without notice due to product improvements or other reasons. it is therefore recommended that customers contact isahaya electronics corporation or an authorized isahaya products distr ibutor for the latest product information before purchasing product listed herein. isahaya electronics corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human lif e is potentially at stake. please contact isahaya electronics corporation or an authorized isahaya products distributor when considering the use of a product contained herein for any specific purposes , such as apparatus or systems for transpor tation, vehicular, medical, aerospace, nuclear, or undersea repeater use. the prior written approval of isahaya electronics corporation is necessary to reprint or reproduce in whole or in part these materials. if these products or technolo gies are subject to the japanese export control restrictions, they must be exported under a license from the japanese government and cannot be imported into a country other than the approved destination. any diversion or re - export contrary to t he export control laws and regulations of japan and/or the country of destination is prohibited. please contact isahaya electronics corporation or authorized isahaya products distributor for further details on these materials or the product s contained therein. jan.2003
|
